MC Memories by Michał Cacko
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is set to 50% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.
LFO 1 mod-matrix 1 modulation amount for pulse width of square oscillator is 99.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to -26.
Oscillators ranges timbre
Oscillators 1 range is 8'.
Oscillators 2 range is 4'.
Noise timbre
Noise level is manually set to 113.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 2047.51Hz (158) and is modulated by Note Vel, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 83.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 119.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 139.
Filter resonance is statically set to 34% (88).
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -12 semitones and is modulated by LFO 2.
LFO 2 direct modulation amount for oscillator 2 pitch is 5.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is off.
Vintage Room Reverb fx
not yet complete
Flange & Reverb fx
not yet complete
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 139 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 119 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 1 Pulse Width Modulation Depth | 99 |
| name | value |
|---|---|
| LFO 1 Rate | 0.52Hz (88) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Sine |
| LFO 1 Key Sync | on |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 61 |
LFO 2 modulator
Controls OSC 2 Pitch, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 5 |
| timbre | fader | VCF Cut-off Frequency | 83 |
| name | value |
|---|---|
| LFO 2 Rate | 0.17Hz (50) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sine |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 1 |
| LFO 2 Slew Rate | 26 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 1.13s (128) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 119 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.4s (68) |
| VCF Envelope Decay Time | 19.19s (219) |
| VCF Envelope Sustain Level | 10% (25) |
| VCF Envelope Release Time | 9.58s (192) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |